(1) the ip address in the router config needs to be set to YOUR local ip address (found by typing "ipconfig" in the command prompt)
(2) you have selected the TCP protocol; it needs to be the UDP protocol
(3) if you want people on your network to be able to join you need to open halo2config1.ini on EACH pc and set up the following:
- (a) make sure every pc has a different base_port setting, we suggest using 2000 (on the host), 3000, 4000, 5000, etc
- (b) set your LAN_IP setting to the local ip of the pc that is being configured (the ip found by typing "ipconfig" in the command prompt
https://mega.nz/#!YcsADKbK!VH8pM9N1dKhGpOZw2LCua322dDz0akVcFmC8jVN5jX8 this tool may make it easier for you